LG Washer Error Code

Date of Job: 05/12/25
Cypress, Texas

The OE error code on an LG (often written as “LE”) washer indicates a drainage problem—specifically, that the washer is unable to drain water within the expected time. “OE” stands for “Outlet Error.” Here’s a detailed explanation:

Causes of OE Error Code

  1. Clogged Drain Pump Filter:
    The most common cause is a blocked drain pump filter. Lint, coins, hair, or small objects can obstruct the filter, restricting water flow.
  2. Blocked or Kinked Drain Hose:
    If the drain hose is bent, kinked, or clogged, water can’t exit the washer properly.
  3. Faulty or Blocked Drain Pump:
    The drain pump itself might be defective or jammed with debris.
  4. Improper Drain Height:
    The drain hose must be installed at the proper height. If it’s too low or too high, it can affect drainage.
  5. Excessive Suds:
    Using too much or the wrong type of detergent can create excessive suds, which may impede proper draining.
  6. Electrical or Control Board Issues:
    In rare cases, there could be a wiring problem or an issue with the washer’s control board.

Troubleshooting Steps

  1. Pause and Power Off:
    Turn off and unplug the washer for safety before inspecting.
  2. Check the Drain Hose:
    • Ensure it isn’t kinked, bent, or crushed.
    • Detach and flush it out to clear any obstructions.
  3. Clean the Drain Pump Filter:
    • Open the access panel (usually at the front bottom of the washer).
    • Place a towel and shallow pan to catch water.
    • Unscrew and remove the filter; clean out any debris.
    • Reinstall the filter securely.
  4. Inspect the Drain Pump:
    • Listen for the pump running. If it hums but doesn’t drain, it could be blocked or malfunctioning.
  5. Check Suds Level:
    • If you see lots of suds, run the washer without detergent to clear them.
  6. Reset the Washer:
    • After addressing issues, plug the washer back in and run a short cycle to test.

If the error persists after these steps, the pump or control board may need professional service.

Summary

The OE error means your washer can’t drain properly. Most often, this is due to a clogged filter, hose, or pump. Regular cleaning and proper use can prevent this issue. If basic troubleshooting doesn’t resolve it, contact LG support or a qualified technician.